Image is for your reference only,please check specifications for details
Updated at 02/11/2025 10:30:15(UTC+8)
Certifications
ManyChip is committed to product quality and safety with ISO 9001, ISO 13485, ISO 45001, UL, RoHS, CQC and REACH certifications.
Description
- Product Details
- The ADAU1463/ADAU1467 are automotive qualified audio processors that far exceed the digital signal processing capabilities of earlier SigmaDSP® devices. They are codecompatible with each other, as well as the ADAU1450/ADAU1451/ADAU1452 SigmaDSP® processors. The restructured hardware architecture is optimized for efficient audio processing. The audio processing algorithms support a seamless combination of stream processing (sample-by-sample), multi-rate processing, and block processing paradigms. The graphical programming tool, SigmaStudio™ enables the creation of signal processing flows that are interactive, intuitive and powerful. The enhanced digital signal processor (DSP) core architecture enables some types of audio processing algorithms to be executed using significantly fewer instructions than were required on previous SigmaDSP generations, leading to vastly improved code efficiency
- The 1.2 V, 32-bit DSP core can run at frequencies of up to 294.912 MHz and execute up to 6144 instructions per sample at the standard sample rate of 48 kHz. Powerful clock generator hardware, including a flexible PLL with multiple fractional integer outputs supports all industry standard audio sample rates, non-standard rates over a wide range can generate up to 15 sample rates simultaneously. These clock generators, along with the on board asynchronous sample rate converters (ASRCs) and a flexible hardware audio routing matrix, make the ADAU1463/ADAU1467 ideal audio hubs that greatly simplify the design of complex multirate audio systems.
- The ADAU1463/ADAU1467 have four input serial ports and four output serial ports. Each has a fully asynchronous clock domain capable of operating as either clock master or slave. In addition, each serial port supports multiple data lines. Each of the eight pins SDATAIO pin may be associated with any of the four input or four output serial ports. Serial ports with multiple data pins use a single bit clock and frame clock to transmit or receive additional channels of audio data. This allows more channels of audio I/O without the need to run serial ports at high speeds. It also enables serial audio communication with multiple synchronous peripherals. The additional data pins can carry from two to eight channels. These expanded serial audio ports, along with the clock generators, the on board asynchronous sample rate converters (ASRCs) and a flexible hardware audio routing matrix, make the ADAU1463/ADAU1467 ideal audio hubs that greatly simplify the design of complex multirate audio systems.
- The ADAU1463/ADAU1467 interface with a wide range of ADCs, DACs, digital audio devices, amplifiers, and control circuitry with highly configurable serial ports, I2C, SPI, S/PDIF interfaces, and multipurpose input/output pins. Dedicated decimation filters can decode the PDM output of up to four MEMS microphones.
- The ADAU1463/ADAU1467 have independent I2C/SPI slave and master control ports. This allows them both to be programmed and controlled by an external master device such as a microcontroller, and program and control slave peripherals directly. Self-boot functionality and the master control port enable complex standalone systems.
- Applications
- Automotive audio processing
- Head units
- Navigation systems
- Rear seat entertainment systems
- DSP amplifiers (sound system amplifiers)
- Commercial and professional audio processing
- ### Features and Benefits
- Qualified for automotive applications
- High performance SigmaDSP core enables low latency and audio applications
- Active Noise Cancellation (ANC)
- Echo-Canceller and Noise Reduction (ECNR)
- Surround sound algorithms
- Increased I/O and/or larger internal memory compared to ADAU1462/ADAU1463/ADAU1466 models
- Features SigmaStudio, a proprietary graphical Integrated Development Environment (IDE), for the development of custom signal flows
- Comprehensive Toolbox of pre-defined building blocks
- Faster design time with proven solutions
- Intuitive system design
- 294.912 MHz, 32-bit SigmaDSP core at 1.2 V
- 24 kWords of program memory
- 80 kWords of parameter/data RAM
- 6144 SIMD instructions per sample at 48 kHz
- 1600 ms digital audio delay pool at 48 kHz
- Audio I/O and routing
- 4 serial input ports, 4 serial output ports with assignable parallel data pins (up to 32 serial data pins total)
- 48-channel, 32-bit digital I/O up to a sample rate of 192 kHz
- Flexible configuration of I2S, left and right justified, and up to 16-channel TDM formats on serial data pins
- 8 stereo ASRCs from 1:8 up to 7.75:1 ratio and 139 dB dynamic range
- Stereo S/PDIF input and output at 192 kHz
- Four PDM microphone input channels
- Multichannel, byte addressable TDM serial ports
- Clock oscillator for generating master clock from crystal
- Integer PLL and flexible clock generators
- Integrated die temperature sensor
- I2C and SPI control interfaces (both slave and master)
- Standalone operation
- Self-boot from serial EEPROM
- 8-channel, 10-bit SAR auxiliary control ADC
- 26 multipurpose pins for digital controls and outputs
- On-chip regulator for generating 1.2 V from 1.8 V to 3.3 V supply
- 88-lead, 12 mm × 12 mm LFCSP package with 6 mm exposed pad
- Temperature range: −40°C to +105°C
ADAU1467WBCPZ300 Specifications
| Attribute | Attribute Value |
|---|---|
| Datasheet | Datasheet |
| 3D Model | 3D Model |
| Mounting Style | Surface Mount |
| Number of Pins | 88 Pin |
| Case/Package | LFCSP EP-88 |
| RAM Memory Size | 320 KB |
| Operating Temperature (Max) | 105 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Show | |
| Operating Temperature | -40℃ ~ 105℃ (TA) |
| Product Lifecycle Status | Pre-Release |
| Packaging | Tray |
| RoHS | RoHS Compliant |
| Lead-Free Status | Contains Lead |
Order guide
-
TT in advance (bank transfer), Western Union, Credit card,
PayPal. Customer is responsible for shipping fee, bank
charges, duties and taxes.
-
- You can choose whether shipping charges will be charged through your shipping account or by us.
- Please confirm with the logistics company in advance for remote areas.
(Additional charges ($35-$50) may apply for delivery in these areas)
- Delivery date: usually 2 to 7 working days.
- A tracking number will be sent after your order ships.
- - Carefully inspected and packed by ManyChip warehouse - Vacuum packaging - Anti-static packaging - Shockproof foam
- The terms here are for reference only, the actual terms are subject to the sales quotation. - Please confirm product specifications when ordering. - MOQ refers to the minimum order quantity required to purchase each part. - If you have special ordering instructions, please indicate them on the ordering page. - Inspection (PSI) will be performed prior to shipment.
- - Income Quality Control (IQC), 1000+ qualified dealers. - Chips are tested by authoritative organizations to ensure the quality, authenticity and safety of your device. - Decapsulation control - X-ray control - XRF inspection - Electrical testing - Surface testing -Digital components warehouse, covering an area of 800 square meters, with constant temperature and humidity
Contact Us
If you have any problem,please email to sales@manychip.com, we will response as soon as possisble.
Popular Search Parts
- Recommended Parts
- Hot Parts
- Popular Parts
- Recently Popular Parts
- TRS3122ERGET TLV73333PDBVT TLV73333PDQNR TPS54202HDDCT STM32WB5MMGH6TR BLM18EG221SN1 BLM18PG471SN1 BLM18SG121TN1 FXMA108 MAX3232EIDWR
- ADE7953 ICM7555 TDA7384 FT2232D FT232BL L7915CV L7806CV SN74LVC1G08DCKR TPD4E05U06DQAR NCP1117ST33T3G
- TLE6232GP UC3525AN HCNW2611 MCP41100 TPS2546 1N4750A 2SK3878 AD8022 FAN7621 OPA2320
- 10AS066N3F40E2SG 10M08DCU324C8G STL45N10F7AG TLV9062IDDFR 1933309 1602203 1406186 TDK5110F AUIRFS8407 DS1487M
SN:H1.0237LO95914V40Q0QC0S2
Buy ADAU1467WBCPZ300
Please fill the information below to send RFQ quickly,and we will respond immediately.