ManyChip is committed to product quality and safety with ISO 9001, ISO 13485, ISO 45001, UL, RoHS, CQC and REACH certifications.
Description
General description
The TJA1080 is a FlexRay transceiver, which is in line with the FlexRay electrical physical layer specification V2.1 Rev. A (see Ref. 1). It is primarily intended for communication systems from 1 Mbit/s to 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network.
The TJA1080 can be configured to be used as an active star transceiver or as a node transceiver.
Features
2.1 Optimized for time triggered communication systems
■ Data transfer up to 10 Mbit/s
■ Usable for 14 V and 42 V powered systems
■ Very low ElectroMagnetic Emission (EME) to support unshielded cable
■ Differential receiver with high common-mode range for ElectroMagnetic Immunity (EMI)
■ Transceiver can be used for linear passive bus topologies as well as active star topologies
■ Auto I/O level adaptation to host controller supply voltage VIO
■ Bus guardian interface included
■ Automotive product qualification in accordance with AEC-Q100
2.2 Low power management
■ Low power management including two inhibit switches
■ Very low current in Sleep and Standby mode
■ Wake-up via wake-up symbol on the bus lines (remote), negative edge on pin WAKE (local), and a positive edge on pin STBN if VIO is present
■ Wake-up source recognition
■ Automatic power-down (in Star-sleep mode) in star configuration
2.3 Diagnosis (detection and signalling)
■ Overtemperature detection
■ Short-circuit on bus lines
■ VBAT power-on flag (first battery connection and cold start)
■ Pin TXEN and pin BGE clamping
■ Undervoltage detection on pins VBAT, VCC and VIO
■ Wake source indication
2.4 Protections
■ Bus pins protected against 8 kV HBM ESD pulses
■ Bus pins protected against transients in automotive environment (ISO 7637 class C compliant)
■ Bus pins short-circuit proof to battery voltage (14 V and 42 V) and ground
■ Fail-safe mode in case of an undervoltage on pins VBAT, VCC or VIO
■ Passive behavior of bus lines in the event that transceiver is not powered
TT in advance (bank transfer), Western Union, Credit card,
PayPal. Customer is responsible for shipping fee, bank
charges, duties and taxes.
- You can choose whether shipping charges will be charged through your shipping account or by us.
- Please confirm with the logistics company in advance for remote areas.
(Additional charges ($35-$50) may apply for delivery in these areas)
- Delivery date: usually 2 to 7 working days.
- A tracking number will be sent after your order ships.
- Carefully inspected and packed by ManyChip warehouse
- Vacuum packaging
- Anti-static packaging
- Shockproof foam
The terms here are for reference only, the actual terms are subject to the sales quotation.
- Please confirm product specifications when ordering.
- MOQ refers to the minimum order quantity required to purchase each part.
- If you have special ordering instructions, please indicate them on the ordering page.
- Inspection (PSI) will be performed prior to shipment.
- Income Quality Control (IQC), 1000+ qualified dealers.
- Chips are tested by authoritative organizations to ensure the quality, authenticity and safety of your device.
- Decapsulation control
- X-ray control
- XRF inspection
- Electrical testing
- Surface testing
-Digital components warehouse, covering an area of 800 square meters, with constant temperature and humidity
Contact Us
If you have any problem,please email to sales@manychip.com, we will response as soon as possisble.
Please fill the information below to send RFQ quickly,and we will respond immediately.
Chat with us now
Chat with us now
ManyChip Sales Manager was online 5 minutes ago. Please leave us a message!
We use cookies
In order to provide personalized display and improve your browsing experience, this website uses cookies. By continuing to browse our site, you agree to the use of cookies. You can also click on the Privacy Policy for more information.