Image is for your reference only,please check specifications for details

SE97BTP - NXP
Manufacturer:
NXP
ManyChip's Part#:
MC269566707
Package:
HWSON-8
Datasheet:
Datasheet 3D Model
Description:
DIGITAL TEMP SENSOR-SERIAL, 11Bit(s), 3Cel, RECTANGULAR, SURFACE MOUNT, 3 X 2MM, 0.8MM HEIGHT, PLASTIC, MO-229, SOT-1069, HWSON-8
Stock Locations:
Availability:
293 pcs In Stock
MOQ:
1 pcs
Unit Price:
$ 0

Updated at 18/06/2026 10:30:15(UTC+8)

Certifications

ManyChip is committed to product quality and safety with ISO 9001, ISO 13485, ISO 45001, UL, RoHS, CQC and REACH certifications.

Description

Overview
Meets JEDEC Specification 42.4 TSE2002B1, 3 Jun 2009. The NXP® Semiconductors SE97B measures temperature from -40 °C to +125 °C with JEDEC Grade B ±1 °C maximum accuracy between +75 °C and +95 °C critical zone and also provide 256 bytes of EEPROM memory communicating via the I2C-bus/SMBus. It is typically mounted on a DDR3 Dual In-Line Memory Module (DIMM) measuring the DRAM temperature in accordance with the new JEDEC (JC-42.4) Mobile Platform Memory Module Temperature Sensor Component specification and also replacing the Serial Presence Detect (SPD) which is used to store memory module and vendor information.
The SE97B thermal sensor and EEPROM operates over the VDD range of 3.0 V to 3.6 V.
The TS consists of a Δ∑ Analog to Digital Converter (ADC) that monitors and updates its own temperature readings 10 times per second, converts the reading to a digital data, and latches them into the data temperature register. User-programmable registers, the specification of upper/lower alarm and critical temperature trip points, EVENT output control, and temperature shutdown, provide flexibility for DIMM temperature-sensing applications.
When the temperature changes beyond the specified boundary limits, the SE97B outputs an EVENT signal using an open-drain output that can be pulled up between 0.9 V and 3.6 V. The user has the option of setting the EVENT output signal polarity as either an active LOW or active HIGH comparator output for thermostat operation, or as a temperature event interrupt output for microprocessor-based systems. The EVENT output can also be configured as only a critical temperature output.
The EEPROM is designed specifically for DRAM DIMMs SPD. The lower 128 bytes (address 00h to 7Fh) can be Permanent Write Protected (PWP) or Reversible Write Protected (RWP) by software. This allows DRAM vendor and product information to be stored and write protected. The upper 128 bytes (address 80h to FFh) are not write protected and can be used for general purpose data storage.
The SE97B has a single die for both the temp sensor and EEPROM for higher reliability and supports the industry-standard 2-wire I2C-bus/SMBus serial interface. The SMBus TIMEOUT function is supported to prevent system lock-ups. Manufacturer and Device ID registers provide the ability to confirm the identity of the device. Three address pins allow up to eight devices to be controlled on a single bus.
The SE98B is available as the SE97B thermal sensor only.
MoreLess
## Features
**2.1 General features**
* JEDEC (JC-42.4) DIMM temperature sensor plus 256-byte serial EEPROM for Serial Presence Detect (SPD)
* SDA open-drain output design for best operation in distributed multi-point applications
* Shutdown current: 0.1 µA (typ.) and 5.0 µA (max.)
* Power-on reset: 1.8 V (typ.)
* 2-wire interface: I2C-bus/SMBus compatible, 0 Hz to 400 kHz
* SMBus Alert Response Address and TIMEOUT 25 ms to 35 ms (programmable)
* ESD protection exceeds 2500 V HBM per JESD22-A114, 250 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
* Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
* Available in HWSON8 package
**2.2 Temperature sensor features**
* 11-bit ADC Temperature-to-Digital converter with 0.125 °C resolution
* Voltage range: 3.0 V to 3.6 V
* Operating current: 250 µA (typ.) and 400 µA (max.)
* Programmable hysteresis threshold: off, 0 °C, 1.5 °C, 3 °C, 6 °C
* Over/under/critical temperature EVENT output
* B-grade accuracy:
* ±0.5 °C/±1 °C (typ./max.) ? +75 °C to +95 °C
* ±1.0 °C/±2 °C (typ./max.) ? +40 °C to +125 °C
* ±2.0 °C/±3 °C (typ./max.) ? -40 °C to +125 °C
**2.3 Serial EEPROM features**
* Read and write voltage range: 3.0 V to 3.6 V
* Operating current:
* Write → 0.6 mA (typ.) for 3.5 ms (typ.)
* Read → 100 µA (typ.)
* Organized as 1 block of 256 bytes (256 × 8)
* 100,000 write/erase cycles and 10 years of data retention
* Permanent and Reversible Software Write Protect
* Software Write Protection for the lower 128 bytes
## Target Applications
* DDR2 and DDR3 memory modules
* Laptops, personal computers and servers
* Enterprise networking
* Hard disk drives and other PC peripherals
## Features

Show

SE97BTP Specifications

Attribute	Attribute Value

Datasheet	Datasheet
3D Model	3D Model
Mounting Style	Surface Mount
Number of Pins	8 Pin
Case/Package	HWSON-8
Operating Temperature (Max)	150 ℃
Accuracy	±3℃ (Max)
	Show
Product Lifecycle Status	Unknown
RoHS	RoHS Compliant
Lead-Free Status	Lead Free
ECCN Code	EAR99

Order guide

Payment Shipping Package Order Quality Assurance

TT in advance (bank transfer), Western Union, Credit card,
PayPal. Customer is responsible for shipping fee, bank
charges, duties and taxes.
- You can choose whether shipping charges will be charged through your shipping account or by us.
- Please confirm with the logistics company in advance for remote areas.
(Additional charges ($35-$50) may apply for delivery in these areas)
- Delivery date: usually 2 to 7 working days.
- A tracking number will be sent after your order ships.
- Carefully inspected and packed by ManyChip warehouse
- Vacuum packaging
- Anti-static packaging
- Shockproof foam
The terms here are for reference only, the actual terms are subject to the sales quotation.
- Please confirm product specifications when ordering.
- MOQ refers to the minimum order quantity required to purchase each part.
- If you have special ordering instructions, please indicate them on the ordering page.
- Inspection (PSI) will be performed prior to shipment.
- Income Quality Control (IQC), 1000+ qualified dealers.
- Chips are tested by authoritative organizations to ensure the quality, authenticity and safety of your device.
- Decapsulation control
- X-ray control
- XRF inspection
- Electrical testing
- Surface testing
-Digital components warehouse, covering an area of 800 square meters, with constant temperature and humidity

Contact Us

If you have any problem,please email to sales@manychip.com, we will response as soon as possisble.

Popular Search Parts

Recommended Parts
Hot Parts
Popular Parts
Recently Popular Parts

SN:H0.77032LO78378V107Q0QC0S1

Buy SE97BTP

Please fill the information below to send RFQ quickly,and we will respond immediately.